1 / 2
Eureka Mignon Specialitá hopper connector 14 degrees
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hopper connector allows for a straight hopper when using a 14 dgree tilted base.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this hopper connector after tilting my Eureka Specialitá by using a tilted base. It compensated the 14 degree tilt so that the hopper remains straight and untilted.
Printed in PETG with 0.4 mm nozzle and 100% infill. The model can be printed without supports if printed upside down.
