Powerbank case for h961-u pcb no bolts/glue 18650
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact DIY powerbank
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 587
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
case for whatever batteries you can find and stuff in it, i used ones from dead elfbars
has internal size of 90 / 21.5 / 63 mm
you definitely want to print the lid on a side, so the clipses are along the layers and wont break off
one thats on photos is a quite outdated, but you get the idea (dont look at the hole, my printer is trying to sabotage me)
and extended version twice as big, cus why not
UPD: made front and back clips 3x wider. Also i spent a lot of time on rather useless feature, but im no less proud of myself. Screen lid, will prevent all too bright screen from getting on your eyes. Lid is getting bend inside of case, dont use brittle materials. Due to my printer successfully destroyng itself, i cant test the clearances, so test thingy available. On the full model you need to squeeze the lid trough inside of a pcb slot. That one is on you.
UPD2: 18650 version added, both normal and with screen lid. They use different lid than others. Standart fits 5 of them, extended 10.
Feedback appreciated. Remix. Enjoy.
