MK3(S) Y Axis Shift After Crash Detection 2 minute Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixes the Y Axis shift after crash detection problem. (Originally posted thingiverse in 2019, porting to PrusaPrinters)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 3
- Wyświetlenia
- 1535
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Thanks to the ZeroBeast and jltx for this.
Basically I wanted a solution for the Y-Axis shift after crash detection. You should read about it here, good stuff:
https://github.com/prusa3d/Original-Prusa-i3/issues/76
However, life gets busy. And rather than pulling the motor, belts etc. I came up with a 2 screw fix and a small printed part that achieves the same result.
Sharing, so you can quickly and easily apply this to a stock mk3.
You only need two screws to install. If you don't have a pack of assorted m3 screws, its a good thing to buy. Here is the one I have from amazon:
https://www.amazon.com/gp/product/B07CZBR66J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1