Armrest for 2011 Kia Picanto / Morning
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable armrest for comfort and storage for the 2011 Kia Picanto / Kia Morning.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Armrest for 2011 Kia Picanto / Morning
I designed and 3D printed an armrest for comfort and storage to my car (a 2011 Kia Picanto / Kia Morning). It fits well between the seats and mounts perfectly in the cup holder, without modifications to the car. The armrest has a hinged top lid for easy access to the storage compartment, with 5mm neodimium magnets to keep the lid closed, avoiding "plastic bump noises". I printed in PLA on my Creality K1C, but PETG or ASA is recommended for higher heat resistance in vehicles.
Print configs (for PLA):
- Printer: Creality K1C
- Slicer: CrealityPrint
- Profile: 0.2mm Standard @Creality K1C 0.4 nozzle (Generic PLA)
- Infill: 15% in 45º square grids
- Temperature: 230ºC
- Layer height: 0.2mm
- Wall loops: 2
- Supports are only needed for the Box (The Lid and the Cup don't require any support):
- Type: Tree Auto ("Normal" would exceed the maximum print size)
- On build plate only: true
- Small overhang area: 20 mm (no need for support on hinge holes)
Other materials needed
- 10 M3x25mm screws (+10 nuts and 20 washers)
- 8 to join the cup to the box
- 2 for the lid hinge
- 2 cilindrical neodimium magnets (h = 3mm, Φ = 5mm)
Filament Cost
| Part Name | Weight (g) | Length (m) | Time (hh:mm) |
|---|---|---|---|
| Cup | 76 | 25.5 | 01:42 |
| Box | 707 | 237.2 | 13:49 |
| Lid | 98 | 32.9 | 1:48 |
| Total | 881 | 295.6 | 17:19 |