Phrozen Arco Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bucket to catch the filament that falls out the back of the Phrozen Arco printer.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Print two of the arms and one bucket.
Arms should be oriented to sit on their side. One side has a slope in the channel so you don't need supports make sure you have it on the correct side.
Print one bucket sitting flat also no supports, it tends to import upside down be sure it's sat down with the flat side down.
The arms can just be held on with friction but a dot of super glue is recommended. The arms h have a channel because one arm fits over a screw and the channel lets it sit flat against the machine.
I printed with 3 walls 15% infill I'm sure you can go lower if you want.