Severance Inspired Home Assistant Voice Assistant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A voice assistant satellite for Home Assistant.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The updated PCB mount now holds:
I had to move the position of the amplifier to place the microcontroller in the center as it's longer than the original board. That meant I had to create a new hole for the USB cable in the back of the case, but since I had already printed that I just drilled a new one instead of change the model and reprint. The headers came soldered to the microcontroller so instead of being screwed to the mount the header pins are just slotted into holes on the base.
I used the instructions from GreatScott! to create a voice assistant satellite for Home Assistant.