Ultra Slim Ender 3 Y-Motor Bracket Double Shear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Double shear support for Ultra Slim Ender 3 Y-Motor Bracket
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 2
- Wyświetlenia
- 234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Ultra Slim Ender 3 Y-Motor Bracket
https://www.thingiverse.com/thing:5158277
Replacement end-stop mount
https://www.printables.com/make/2724415
BOM
4x m3x30 instead of m3x20
1x 625ZZ bearing (Two can be salvaged from a v-wheel. Use a flat head screwdriver. Insert the screwdriver down the center, line it up with the split between the two bearings, and gently work them apart by pressing down on the center hub of the opposite bearing.)
Stepper motor with 24mm shaft is ideal. Larger may work.
Measure the depth of your steppers mounting holes to determine if you can use the deeper/more engagement 6.4mm version. Otherwise, the 4.4mm version should work for all steppers with 4.5 mm minimum holes.
Original Ender 3 pro stepper will NOT work.
Grub screw access hole should be mounted at the top.
Mirrored version for Switchwire style mounting is UNTESTED.