Strawberry Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stand for garden strawberries will allow the berries to grow without touching the ground.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stand for garden strawberries will allow the berries to grow without touching the ground. This reduces the likelihood of rotting and damage by pests. And the berries become cleaner.
The stand is assembled from 4 parts and 4 legs. The legs have latches and can be easily removed to separate the stand into parts or storage. To use it as a whole circle, you will need:
Strawberry Stand_1_3 - 2pcs.
Strawberry Stand_2_4 - 2pcs.
Strawberry Stand Leg - 4pcs.
You can use it as a semicircle or even a quarter on large strawberry bushes. For this, you will need additional legs.
The print in the example is from PETG. I do not recommend printing from PLA, because it quickly degrades in the sun.
It took me about 2.5 hours to print one full set at a time at a speed of 160 mm/sec.
The assembled stand is excessively strong. In the photo, I put an impact driver weighing 1.5 kg on it for testing.