Electric brush cutter blades(Puly/Brücke, possibly others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ø26mm mounting hole, Ø220mm/Ø345mm blade, 2/3/4mm thickness. Probably fits other similar cheapo cutters.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Lighter blades for cheapo battery operated brush cutters.
Don't know how they'd survive if used in a gas-powered tool. If you're gonna try, I'd recommend not to use the screw-on blades version.
Use stiff TPU for everything and M4 hardware for attaching the blades to the hub. Don't forget the washers!Print with at least as many walls as it takes to cover the area that's left under the washers. Due to the use case being very rough-and-tumble, best bet would be to print with walls all the way through and some extra flow to really fill all the gaps. Removable blades require supports, snug works best.
I used Devil Design TPU 55D with good results, blades are showing more wear than tear after moderate abuse. I've printed and tested only the Ø345mm version with removable blades. Give me a shout if you try the other ones!
Word of warning though: I managed to hit a bigger rock that caused so much wobble that one of the blades hit the blade guard. The blade suffered only minimal edge damage, but tore a mean gash in the guard.