1 / 3
WillTravel 8x10 back for Sinar P (and Horseman) — zdjęcie 1
1 / 3

WillTravel 8x10 back for Sinar P (and Horseman)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WillTravel 8x10 back adapted to Sinar 4x5 P. Enclosed STL for the WillTravel 8x10 back, plus fusion 360 files for the a

Ocena
0 / 5
Polubienia
7
Pobrania
72
Wydruki
0
Wyświetlenia
534
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

8x10 back for the Sinar 4x5 P system (and horseman)

see enclosed stl's and fusion files. Its smart to look at the cones and adjust so that you avoid vignette (to much extension needed on the Sinar 4x5) and at the same time that it matches the focal length.

Short cone for lenses around 250mm, long cone for 300 - 400 mm. the supports slide into the sinar rail to add extra support for the back. Should be a quick fix to change it to the Horseman rail as well.

 

The add some M3 brass inserts and M3 screws. And 45mm screws and nuts to the grip if you want to use it. 

Tagi