1 / 1
Prusa lack enclosure handles redesign to fit 20x6x1,5mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little Remix to slide in the smaller magnets which are easier to buy of the internet.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (33)Powiązane
Just a little Remix to slide in the smaller magnets which are easier to buy of the internet. also slide in from the side. Also made the acrylic glas inserts 0.2mm thinner so 3mm glas fits in tight.
Print instructions
Unassociated tags: lack enclosure
Category: 3D Printer Accessories