1 / 3
Accessories for the Elikliv EM4K-AF video microscope.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3rd hand mount, lens cap, and caddy for storing the remote. The lens cap should be printed in TPU.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 11)Remiksy (0)Kolekcje (3)Powiązane
There is a mount for a third hand assembly, a caddy for the remote control, and a TPU lens cap to protect the optics when not in use. The lens cap should be printed in TPU for a nice snug fit, the other parts can be printed in PLA, PETG, or any material you choose. The third hand mount needs two M3 screws and nuts to clamp it on the base of the stand. Just about any 3rd hand hardware should clamp onto the mount.