1 / 2
MK4S Nozzle Camera (ESP32 Cam S3 Wroom) — zdjęcie 1
1 / 2

MK4S Nozzle Camera (ESP32 Cam S3 Wroom)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Nozzle Camera support a ESP32 CAM S3 Wroom module mounted on the x-axis motor, give a good view to the nozzle

Ocena
0 / 5
Polubienia
9
Pobrania
33
Wydruki
0
Wyświetlenia
281
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This Nozzle Camera mounts an ESP32 S3 Wroom camera module to the X-Axis motor. The Case can be easyly opened on the top for mounting the SD-Card. It also has some openings for operating the bottoms and see the controle LEDs. There is also a special opening for the LED flas light.  

The model is inspired by the “NozzleCAM” from OnlyCurves 
(thanks to OnlyCurves for his detailed description)

It is completly new designed as the format and behavior of the Wroom camera is very different.

This CAM can also be used in combination with PrusaConnect (or just a webpage) to allow you to controle your Prusa during printing. 

Due to the X-Axis mount the camera is always following the printing layer.

It fits to Prusa MK4(S) 

mount it with a M3x18 (or 20) Screw

I use a ESP32-CAM-S3 Wroom module from here with a 66 Degree OV2640 8mm lens 

Information for flashing can be found here

For connection it needs also an USB-C cable

 

 

Tagi