Articulated Cute Frog
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Articulated Cute Frog (Singe, Multicolor, Multipart)
- Ocena
- 5 / 5
- Polubienia
- 176
- Pobrania
- 1028
- Wydruki
- 12
- Wyświetlenia
- 3069
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
Tips for printing:
- Filament: PLA
- Supports: No!
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: classic
- Detect thin walls: No!
- Brim: No!
- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
⚠Warning⚠
Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
Do not scale the Frog any smaller otherwise the connections will no longer work!
Colors and filament I used (4 Colors):
- PLA Matte / Green
- PLA Matte / Black
- PLA Matte / White
- PLA Matte / Yellow
Colors and filament I used (3 Colors):
- PLA Matte / Green
- PLA Matte / Black
- PLA Matte / White
Or decide for yourself which colors and how many you want to use!
This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste! Or you can use my multiple parts version to avoid filament waste!