Additional external battery from internal for Segway Ninebot ES1/ES2/ES4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
read the description
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :)
A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life.
You will need:
XT30 (male and female)
cable 22 AWG and 16 AWG (about 8 centimeters each).
Ideally, use a connector like this
External battery connector (for example)
but i just took 2 xt30 (male and female) and the original terminals from the battery data connector
M3 embedded nut:
11 pcs.
M3 bolt 20 mm:
11 pcs.
M4 bolt 20 mm:
2 pcs.
Connection principle (Borrowed from mveplus on GitHub):
to connect and save the charging port, extend the cable
test connection,
to check for charging