35 Degree Spacer for Google Nest Doorbell 2nd Generation (Wired)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printable 35 Degree Spacer for mounting the Google Nest Doorbell, 2nd Gen, Wired. Base model by "Corpulent"
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Original Description:
“ We have a rather large inset doorbell location, so much so that mounting a video doorbell at that location would have a very narrow view with obstructions on both sides. This is a spacer for mounting the Google Nest Doorbell, 2nd Generation, wired version at various distances.
Be aware, you may need longer screws to use the spacer. I used 3 inch screws for the 55mm spacer. I printed the model in ASA with 0.02 mm layer height, 3 wall loops, and 15% Cubic Infill.”
I added an angled extrusion and created holes to ensure wall screws go straight into the wall. I additionally reduced the diameter of the holes required to mount the security bracket to the spacer. The reduced diameter of the holes is now the tap drill size for an M3 screw. This reduction allows the threads of the screw to bite into the plastic spacer. It may be advisable to slightly heat the provided screws to ensure they don’t create unnecessary deformation.
Updated with installed pictures.
