GM6 LYNX dummy replica model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully 3D printable, working dummy model of the GM6 LYNX.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully 3D printable, working dummy model of the GM6 LYNX.
Requires a knife and glue for assembly.
There is no BOM of materials for screws, springs, etc. so all movements are manual.
Suitable for cosplay/decorative purposes, rough handling is highly discouraged due to the fragile nature of the 3D print.
The parts are divided into folders for each part, and the recommended output orientation is set in the 3mf file.
The scope model is not included.
Here is a quick video of it in action.
2025/02/04
-standing model with the bipod unfolded is
strongly discouraged due to the risk of bipod breakage!
-Add upperbody_back reinforce part location
-Modify cover / cover hinge modeling
-Add / modify some readme file
2025/02/15
- Add simple assembly guide
- Add connector Upper_body_back_front, Upper_body_back_front
- Add / modify some readme file
3D printing settings
Printer settings
- Bambulab X1CC
- eSUN PLA
- Polimaker PolyTerra PLA
- orca slicer 2.2.0
- basic support, mouse ear brim