Rokid Max 2 Prism Holder Temporary or Semi permanent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold trial prism lenses to your Rokid Max 2
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
Followed https://www.reddit.com/r/rokid_official/comments/14ksyh8/hardware_way_to_alter_ipd_distance_between_pupils/ but it frustrated the heck out of me trying to hold the prism. And getting more permanent solution, was so unnecesserily convoluted and expensive. So I shelved this idea but one day just decided to do what I was procrastinating on, model a solution myself.
No existing CADmodel, so guess work and trial and error had to be done, while tracing canvas in Fusion 360. This thing is curvy, and I'm fusion360 amateur.
The model “attaches” itself on the cover, so you need to the light cover. I only use this as an external screen so I have it on all the time anyway.
Only created the right one. Clone and mirror in your slicer for the left.
I “made” it more stable by adding a tab on the top right (or left) to stick onto the headset itself. I used blutak in my picture.