minimal rotating laundry detergent drip catcher (no cup)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mini version of the detergent drip tray if you directly dispense detergent without a cup. It rotates for pour access.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in petg, faces offset .15mm each, and may seem too loose at first but will snug up for a friction-fit when placed on the detergent dispenser. Designed to fit Tide 150-170fl oz containers and or similar brand/sizes. The opening is roughly 43.575mm for a press-fit.
Print .4 nozzle, .20mm layer height.
fusion f3d file included for anyone who wishes to remix.
I recently re-designed my detergent hanging shelf for use with the measuring cup, but I honestly haven't used the measuring cup for a couple years since getting a front-load washer where I'm easily able to dispense directly into the fill tray.
I didn't want a giant pad (I don't need a 3d printer for that), and I wanted to get a little silly with it.
Two interlocking rings snap together, and the outer ring has a small catch-shelf for detergent drips between uses. It rotates up and out of the way of the dispenser spout when filling your machine and can be easily removed and cleaned if necessary.