3/8 Inch Ratchet and Socket Set Rugged Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged Box design to hold a US Pro 3/8 Ratchet and BGS socket set together with a couple of bits and extensions.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print in PETG or PLA but I recommend PETG since you are likely to get oil on it if you are going to use it for automotive work.
I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance and 0.1mm thickness.
This set is made specifically to fit all of the following items, but other brands may also fit:
1 3/8 Ratchet made by US Pro: https://tinyurl.com/2b58w7x3 this will probably work for most metal handle 3/8 ratchets in this style with a total length of 20cm.
1 3/8 socket set made by BGS: https://tinyurl.com/3nkm487j
1 wobble extension kit (75mm and 150mm), probably most brands will fit: https://tinyurl.com/55pz5dbj
1 swivel adapter: https://tinyurl.com/mvuc8u5p
1 3/8 to 1/4 adapter: https://tinyurl.com/2s3c84wf
1 3/8 inch bit holder: https://tinyurl.com/ycpztx4z
1 1/4 inch bit holder: https://tinyurl.com/2e6xnhc3
1 1/4 inch handle: https://tinyurl.com/44cehdan
1 bit socket set torx: https://tinyurl.com/434c8e5t , almost any ¼ inch bit sockets should fit.
1 bit socket set hex: https://tinyurl.com/57vymbh4 , almost any ¼ inch bit sockets should fit.