Ender 3 V3 KE Horizontal Screen Holder (Guppy screen)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen holder for Ender 3 V3 KE when using Guppy screen (landscape mode)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Screen holder for the Nebula pad of the Ender 3 V3 KE in a horizontal/landscape position. I have made this model after using my first mount for some time. However I wanted to decrease the horizontal footprint of my Ender as much as possible to fit another printer next to it. So I made this mount instead.
Advantages are
- Smaller horizontal footprint of the printer
- Easy access to screws for mounting
- Easy access to usb-c port on the back
- Low enough not to be in the way of a camera arm mounted on the z-axis
- Screen can be easily removed from the mount
Print instructions
Use (tree) support for the pins on the display mount. Use 3 or 4 walls for extra strength.
Assembly
Use the original mounting screws to attach the mount to the printer
You can use the Helper script from Guilouz (https://guilouz.github.io/Creality-Helper-Script-Wiki/) to setup Guppy screen and other useful features on your Ender 3 V3 KE.
For the Guppy screen configuration you need to set display rotation to "2" (180 degrees), see https://ballaswag.github.io/docs/guppyscreen/configuration/#display_rotate
If you already have calibrated you need to re-calibrate by removing touch_calibration_coeff from the config file (https://ballaswag.github.io/docs/guppyscreen/configuration/#touch_calibration_coeff)