Next Gen Enclosure PC4-M10 PTFE Adapter Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the acrylic place used at the back or top of the Next Gen enclosure to help contain heat.
- Ocena
- 4,5 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 2
- Wyświetlenia
- 594
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this to replace the clear acrylic piece that came with the NextGen enclosure. It had much bigger holes and nothing to secure the PTFE tubing to for the MMU. I designed this to pass a PTFE tube through to the MMU inside the enclosure using PC4-M10 fittings. It helps contain the heat better when printing filaments like ABS and ASA.
Material: PLA, PETG, ASA, ABS, anything you'd like really. CF has a nice finish that contrasts with the glossy black of the enclosure nicely.
Supports: No
Layer Height: .2mm (PrusaSlicer 0.20mm QUALITY setting works well)
Infill: 15%
Infill Type: Gyroid