Heltec v3 case for 3000mAh battery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of form-fitting case to accommodate a larger battery.
- Ocena
- 4,9 / 5
- Polubienia
- 67
- Pobrania
- 1181
- Wydruki
- 8
- Wyświetlenia
- 3491
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A form-fitting snap together case for the Heltec v3 meshtastic radio with OLED display that fits a makerfocus 3000mAh battery nicely. It's a close fit, so take your time putting it together. I tried to adjust some tolerances to make it a little more forgiving as I cracked the display the first time I was putting it together. The antenna wire routing slot helps with that since you don't need to run it around underneath the board. A thumbnail or guitar pick or other small spudger-type device is best for getting it open when needed.