Standalone Silica Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a container to hold your silica beads while you dry them in a filament dryer
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 2
- Wyświetlenia
- 255
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I liked Brekel‘s design, but didn’t have a Bambu spool, so I changed the sizing a bit and made a screw-on top. The outside screws on, and the inside of the lid just snaps in to keep all your beads in the container.
I also made a divider to allow more airflow during the drying process.
There is also a lip-connector for using the excellent funnel that Brekel designed. I had accidentally printed the funnel without resizing and didn't want to print it again so I just made this lip-connecter. I used super glue to attach the two parts together and it works well.
Thanks to @Brekel_55292 for the initial design!