V-Brake Pads (bike)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prototype rim brake pads for V-brakes. Use for fit or mock-up, testing and experimental use only. (not safe for street!)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
These are 3D-printable rim brake pads designed to fit standard V-brake systems (linear pull brakes).
They are based on real-world dimensions (70 mm pads) and include:
- A 6 mm center hole for mounting bolts
- A hexagonal pocket for an M6 nut
- A slightly curved brake surface to match rim contour
These pads are intended for:
- Fit-testing brake arms
- Visual mock-ups or educational demos
- Casting molds or experimental projects
- Actual brake pads (if youre crazy enough)
Printing Tips:
- Material: PETG or TPU for slight flex, PLA for mock-up
- Infill: 100% for best strength
- Orientation: print on side for cleaner bolt hole
SAFETY WARNING:
Do not use these pads for actual bicycle braking.
3D printing materials like PLA, PETG, or TPU cannot withstand the heat, friction, or force generated by real braking.
These are for testing purposes only.
Nobody but yourself is responsible for any accidents caused by the lacking functionality of these brake pads.
Be careful!