1 / 2
120 6x6 Film Carrier/Holder replacement (compatible with Valoi Easy120) — zdjęcie 1
1 / 2

120 6x6 Film Carrier/Holder replacement (compatible with Valoi Easy120)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

film carrier that allows you to scan 6x6 photos with ease. Designed to work with Valoi Easy120 unit.

Ocena
0 / 5
Polubienia
15
Pobrania
232
Wydruki
0
Wyświetlenia
1099
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

I was having a multitude of issues with the original film carrier that came with the Valoi Easy120 system, so I made my own. 

This carrier design is much less susceptible to having the negatives warp when they are fed through, which would not allow the film to actually go all the way through on the supplied film carrier. 

It also keeps the film much more flat which is more optimal for getting better scans. 

It fits and “snaps” into place into the Easy120 unit just as well as the one that is supplied with the unit, giving it a very “factory” feeling, as the one they ship out is also 3d printed.

I printed it in CF-PLA at .16 layer height with 15% rectilinear infill, and it seemed to work well, though if you want I might suggest an even finer layer height as the tracks where the film has to flow upwards can get a bit jittery because of the layers. I also used snug normal supports on the overhangs that surround the 6x6 holes.

I glued both pieces together and it seems to work great this way. 

 

Disclaimer: Original design, not affiliated with or endorsed by any brand.

Tagi