ChiTu Systems H2 mount adapter for Anycubic Photon Mono M7 PRO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those who hate stock vat with integrated heater
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Small intro
M7 PRO came up with some questionable gimmicks, like vat with resin heater that kinda uncomfortable to clean after print (despite cleaning mode), and resin feeder that have risk of resin contamination. I decided to go with something universal, durable and less tricky for maintenance, yet still keeping printer stock - i've bought ChiTu Systems H2 heater and vat from regular M7 (since it's compatible with PRO version).
Since M7 Pro lid has cutout for feeder - it's perfect place to mount a heater, tho, you're sacrificing with feeder and USB port.
There's 2x2 options for mount - sealed one (with no air duct) and one with air duct. Both come with integrated wire support and separate part options. You should have a couple of M3x8mm SHCS from box for feeder, so you can use them to attach mount.
Suggestions for print
- ABS/PETG filament (PLA also could be used)
- 3 wall loop recommended
- Ironing of lid seal contact surface is recommended
Extra materials
For separate version you also need:
| Part | Size / Standard | QTY | Source |
| M3 bolt | M3x8mm SHCS | 2 | https://aliexpress.com/item/1005004619528614.html |
| M3 threaded heat set inserts | M3x4.5x6mm | 2 | https://aliexpress.com/item/1005005220632314.html |
| Double-side adhesive tape | 1 | https://aliexpress.com/item/1005008475564710.html |
Use solder iron to insert hotmelt nuts into holes on the back side, then screw in wire support.
Cut to size adheisive tape and put it to seal dent, then attach lid seal
