3.5mm Helmet Mount for Cardo Packtalk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solid motorcycle helmet mount for the 3.5mm audio adapter on Cardo Packtalk bluetooth comm cradles.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 2681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a sturdy mount that would protect the 3.5mm adapter for a Cardo Packtalk motorcycle headset from repeated use on my helmets. I prefer earbuds to speakers - this lets me use the same earbuds on a couple different helmets, and allows for plugging in with one hand once my helmet is on.
I've only tested with a Packtalk cradle, YMMV with other Cardo models. There's an extra mirrored 3mf if you'd like the plug to be forward.
Be careful lining up the adapter - it's a tight fit once you press it home, and may be damaged by removal. Attached with double-sided tape.
As always, mount hard things to your helmet at your own risk.
Printed with a 0.6mm nozzle and PETG, no supports. The "wire" side with the small opening should be oriented toward your build plate.