Odogaron Slinger - Monster Hunter World (metric Magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Odogaron Slinger from Monster Hunter World using typical metric magnets and skeleton arms to put foam clay on
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
You can look at the model here: https://a360.co/4miPxxm
Materials:
To build it the intended way, you need:
Screws:
I'm not sure about the exact sizes anymore, but I don't think I used more than what comes with a M2, M2.5, M3 countersunk flat head screw set.
My guess:
10x M3x16mm
16x M3x(10±2)mm
4x M2x16mm
4x M2 Hex Nuts
Magnets:
6x ø12x2mm
30x ø6x3mm
4x 15x15x3 mm (attachment to your arm)
Though this might not apply exactly to your case, depending on how you build things, because sometimes magnets could just be replaced with glue and maybe you don't want the magnetic attachment for your arm. I would advise to take a look at the model yourself before ordering.
If you already have similar magnets at hand, you can just change the parameters in the Fusion360 model and use that. If you don't have a Fusion360 license, you can try contacting me via DM to ask for a custom size.
Printing:
It's the easiest to just take the 3mf and import it into you Slicer of choice and hit import as multiple objects (or similar) when it asks you to. Then just hit auto orient and arrange and distribute the parts on multiple plates or print jobs (by hiding objects) depending on your printer's size and capabilities.
I'd recommend using a 0.4 nozzle with the default or a good working profile, no supports should be needed.
Depending on your printer especially the slim standing parts may need a brim, and the large flat parts could warp.
Assembly notes:
The arm subparts should be glued together, but be careful and look at the model, because the parts are not keyed.
The arms are intended as a skeleton for EVA foam clay or similar to be applied to shape the actual wanted form and then paint it.
If you want the arms to swivel in a reasonable range, the left and right arm connectors need to be swapped during assembly.
The bottom attachment piece is designed to be fitted to a 5mm sheet of EVA foam that attaches to your arm or costume.
For the arrowhead I'd recommend screwing the small cylinder onto it and then glueing it to the larger one.
The original model has a few more pictures during assembly: Slinger - Monster Hunter World by CodeMinion
