1 / 4
Drying Rack Riser / Laundry Airer Lift – Erhöhung für Wäscheständer (10 cm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits most drying racks and airers, raising the frame by 10 cm to keep laundry on hangers from touching the ground.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
If your drying rack isn’t quite tall enough for shirts and T-shirts on hangers, this might be the perfect solution. Raises most drying rack frames by 10 cm to keep shirts off the ground.
Dimensions: height 140 mm, width 100 mm, depth 100 mm.
Printing
At 0.3 mm layer height and 8% infill, each piece uses approximately 150 grams of material.
Four pieces are required. No support needed.