Stand for Lego 75288 AT-AT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have nothing to to with the company Lego. Just to make sure they won't sue because of the "lego" in the title.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Lego AT-AT 75288 doesn't stand very good on it's own feet so I made this totally oversized stand.
I made the adapter because then I don't have to print the whole thing if it doesn't fit. It is not perfect. The positioning under the AT-AT could be better (not well balanced) and also it shouldn't be totally flat but it was ok for me.
(Printed with Polymaker Polyterra Charcoal Black)
Print Instruction
0.25mm Draft Setting for PrusaMINI in PrusaSlicer (But with Gyroid infill)
Infill: 5% is more than enough.
No supports needed.
I cutted the big part in PrusaSlicer to fit the PrusaMINI and glued them together.