Meshtastic Meshcore Faketek Rak Heltec Solar Node Repeater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outdoor Solar node that fits the Heltec, Faketek and Rak. Super cheap and super stealthy
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 1922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This is an outdoor node that I made that uses a TPU gasket. It fits the Rak, faketek and heltec devices (print the right one)
Uses an N type connector and PG7 gland.
The solar panel is designed to slot into the Solar carrier and is optional. This is the solar panel that I use - its cheap and works.
https://www.aliexpress.com/item/1005005009352740.htm
Ali links expire so i put a screnshot of teh listing. The panel is 107x61mm and the carrier works so well. very happy with this design. Fully waterproof too.
If you dont want the meshcore logo, just fill in the MMU colour
uses M3 x 8 or 10 to close it
M2 x 4 screws to hold the battery tray and pcb in place.
Takes single or dual battery tray for 18650