1 / 3
Sticks and poles holder (20x10cm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed something to lift my sticks, various long parts off the floor and prevent them from falling :-)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed something to lift my sticks, various long parts off the floor and prevent them from falling :-)
Two pieces, lower is a “tray” and upper is a “loop”. You can print several loop parts if you need.