Genrad FDS2000 Jaguar PDU base station

I made this for my PDU to hold the power supply and CD reader/CD's and board. This is what I used in this: Power supply Meanwell RD-50A (5VDC/12VDC) https://www.amazon.com/RD-50A-VP-Enclosed-Switching-Supply-Output/dp/B06WD3W8L1/ref=sr_1_1?crid=1ONMXPLMQWUUE&dib=eyJ2IjoiMSJ9.lf1OT4Zw-_C9bah9fEoW9kaAg22XLqu4krjQ0nuJCSfdCJQjdhtnpei7LIimYVKuT0SGcbqbRNCNmYe9aZ07abMGHZt8JDxyIbyE3GTYvKwv1bxZgo7MBPh731GAL3B9zGVoUbQxoibJXcF2muV8BC84_dqjyi8VyN4GnRx9JsUYe1hgpP2HHR81AYQvQEv9WUnJgD1r5zMGaWR3AGQe226QvDNZ18vw9AEW5YMykih0O5nDP_n-P3AFLJpLM0jkxEbICVnNCjZoIYZrLCKrNyhthvTucdyQvbgJBvrU3QQ.XqK-TQnD3yfPBGrT5uD208x4EkGl_QOYwHtCHYyI3j0&dib_tag=se&keywords=meanwell+rd50a&qid=1752063220&s=industrial&sprefix=meanwell+rd50a%2Cindustrial%2C110&sr=1-1 Led housing https://www.amazon.com/dp/B0CJML5X36?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_11&th=1 Interface board- reach out to the maker on this thread https://www.jaguarforums.com/forum/xj40-xj81-25/jaguar-pdu-manuals-software-126647/ (this thread also has the information on how to make the cable which you'll also need) JST wire for led's (can use anything here, but these have nice disconnects and are the right length) https://www.amazon.com/dp/B098FHG9RR?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_17 IEC 120VAC power panel https://www.amazon.com/dp/B07KS2TQ45?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 IEC power cable (I made this for 120vac power, so these two items may be different if you're overseas. If there are some alterations you want, reach out and I'll add the changes. The "mickey mouse ears" are to keep the corners secured to the build plate as its a long print and uses more than a single 1kg roll of filament (get at least a 2kg roll or plan on a filamet change) remove the ears after printing...used a brim as well. I printed it at 25% infill and used PLA. The tool holds the nut for the led sockets and the other end helps to tighten the ring for the panel socket (for the cable). 3mm hardware and brass inserts. counter sunk machine screws. I've added an additional version without the mickey mouse ears if you're tight on build plate space. update 7-12-2025, added an additional screw on the back cover as it was a little loose in that area

Category: Hobby