Ergonomic 3D printing spatula - Layer Lifter (a must for your hot bed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Layer Lifter: practical tool for makers. Simple and very useful design.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Have you printed something and couldn't get it off the bed?
Worry no more! With Layer Lifter, you can print your own spatula quickly and easily.
Designed to be ergonomic, practical and resistant, this tool will help you peel off your printed pieces without damaging the surface or your fingers.
Ideal for any maker who wants to always have a solution at hand... printed by himself!
Configuration:
Speed- 60mm/s
Filling- 25% I recommend the gyroid pattern
Sidewall lines- 4
Top and bottom lines- 3
Filament: Pla and its variants or Petg I recommend last one because it have better layer adhesion.
Tips:
Line width- 0.6mm if using 0.4mm nozzle and 0.8mm if using 0.6mm nozzle. A line width greater than the nozzle width guarantees that the fusion between layers will be better and therefore the part will be stronger.
Layer height- 0.16mm, a smaller layer height will make the part stronger but may take longer.
If you have any question or tip for future versions please comment the model.