Holders for 2,5L Givi Jerry Can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solution for attaching Givi 2.5L jerry cans to any vehicle. Two types of holders help to find the best solution.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Commercial Use
Holder is designed so that, with the correct installation, all the loads are transferred into the structure of the vehicle through a 1" tie-down strap, rather than 3D printed parts. Includes two types of holders that hold the jerry can from two different sides. This allows the jerry can to be positioned in the most optimal way for each installation location.
In the last image, there is an example of how the holder can be attached using an aluminium plate. Just remember to route the tie-down strap so that it goes around the structure of the vehicle, ensuring that the 3D printed part only takes compression loads.
Additional required hardware:
- M6 or ¼" attaching hardware. (Internal hex or Philips head)
- 25mm or 1" tie-down strap. At least 50cm in length.
The installation must be made so that the tie-down strap goes around the vehicle's structure, which can support the loads generated by the full canister, even in the event of a crash. The person who prints and installs this holder takes all the responsibility that it is printed strong enough and that the installation is made in a way that is safe in all situations.
This is published under Commercial Use license. So if you want to print these for selling, just go ahead. :)