Skadis Netgear Orbi Mount Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Netgear Orbi Mount for the IKEA Skadis pegboard system.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 178
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original design, but I wanted to optimize it a little to use less filament. I also wanted to make it work with my Skadis pegboard.
This is designed to use (qty 2) M4x12 SHCS to secure the router to the mount. It's a more minimal design than several out there, and doesn't obstruct the airflow for cooling. This was designed around the RBS750 router, but should work for any Orbi router that has mounting holes on the bottom that are 110mm apart.
I printed this on a Bambu Labs P1S, using Elegoo Rapid PLA+, but any filament should do for this. Also, I used the generic 0.20mm layer height print profile with no changes. I don't think the print settings are terribly critical for this design, but let me know if you need more details.
I've uploaded the .3mf file as well as the .step file so people can make changes as they wish. Please provide any feedback that may be valuable.