1 / 4
Drain Hair Catcher / Strainer for Shower or Bathtub — zdjęcie 1
1 / 4

Drain Hair Catcher / Strainer for Shower or Bathtub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This hair catcher was designed as a cone to avoid getting completely covered with hair, and to make grabbing it easier.

Ocena
0 / 5
Polubienia
5
Pobrania
71
Wydruki
0
Wyświetlenia
280
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Share Alike

This hair catcher was designed as a cone to avoid getting completely covered with hair, and to make grabbing it easier, for cleaning purposes. The fins on the bottom fit snugly into a standard European bathtub or shower drain like the one on the photo, with ca. 43 mm inner diameter.

Print it standing on the round flat face without support. You might have to use a brim, depending on your print bed.

Printed in red and black glitter PLA from recyclingfabrik.de ("Funkelnde Kerze" and “Funkelnde Nacht”).

Tagi