BTT Mini 12864 display housing for 3030 profile RatRig vCore
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display holder for 3030 profile
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 1003
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is housing for the BigTreetTech 12864 Display. Might fit other versions of the 12864 as well, not tested.
Two versions included: with and without the reset button.
Be careful: once the printed button is put on the switch, it will never come off again without destroying the switch. That is why I use the version without reset button.
The X on the button doesnt look that good printed. You might want to use a smaller nozzle or modify the model.
STEPS included.
Printing instructions:
Can be printed without supports
Mirror the bracket once, you need two in total.
Hardware needed:
4x M3x10-12 to fix the display in the enclosure
2x M3x10-16 to fix the thing to the 3030 profile
2x M3 3030 nuts