Sovol Zero Exterior Carbon Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An exterior carbon filter to capture VOCs (hopefully) using the existing exhaust.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 3
- Wyświetlenia
- 468
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The interior carbon filter doesn't seem to have any amount of airflow through it, with or without the filter in place. So I decided make one on the exterior exhaust port until I redesign the interior filter.
There are three parts"
- air filter (which is the mount)
- container (holds the pellets)
- lid
This uses the existing screws on bottom portion of the exhaust fan. I used my own activated carbon pellets, but you can probably reuse the existing interior one or use a sheet. Using tape on the edges can probably improve the air leaks between the gaps.
I know there is a HEPA filter mod by @MP_660455 ,but it took less time to make this than to receive the filter. I'll try to make an attachment to use those filters and mod when possible.
Any filtered air is better than none.