Rock Climbing, Key Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A unique way to display and hold your keys
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 156
- Wydruki
- 4
- Wyświetlenia
- 1297
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this keychain board for my car keys, keys, etc. I made my nuts out of 2mm metal wire and some cramp connections. Over that some colored shrinking tubes and then a clear protective color. The nuts are made on an SLA printer and the board is on a Prusa MK3S+
Wire: https://www.aliexpress.com/item/1005007022745768.html
Crimping tool: https://www.aliexpress.com/item/1005006151901483.html
Wire Chrimp: https://www.aliexpress.com/item/1005005563451179.html
Shrink Tube Color 2mm / Trans 3mm: https://www.aliexpress.com/item/1005005563269357.html
3D printing settings
Board:
Print in PLA or any material you wish
I have used fuzzy skin
Skin Thickness 0,25mm
Skin Point distance 0,6mm
The nuts, have been printed on an Anycubic Photon M5S Pro with standard resin V2. But they could easily be printed on a FDM printer
Join the community • Coffe • Cults3D • Printable • Discord • Tiktok • Youtube
