QIDI X-Max / X-Plus Hygrometer / Thermometer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Hygrometer / Thermometer Holder that snaps onto the rear chamber fan cover of the QIDI X-Max and X-Plus.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 407
- Wydruki
- 6
- Wyświetlenia
- 1834
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Support
All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)
https://www.paypal.me/humebeamengineering
About
This is a Hygrometer / Thermometer Holder that snaps onto the rear chamber fan cover of the QIDI X-Max and X-Plus. It was requested by one my followers. It might fit other printers as well.
BOM - Bill of materials
You need a small round hygrometer (mini) with a 41 mm diameter which you can pick up from. AliExpress for example. I bought a bunch since they're so cheap and I have one in each of my filament dry boxes as well:
Mini Digital LCD Thermometer Hygrometer
What to print
Print the bar upside down and the parts how I have placed them in the preview below.
Add some supports below the tabs of the “bar”.
How to install