Barn Door Lower Slot Floor Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Item it replaces could also be called a roller rail or floor rail
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 51
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
As pictured, the lower guide / rollers for my barn door broke, so I designed and printed a replacement.
I also happened to drill the holes in my floor too wide when I first installed it, so I took the opportunity to make the guide a bit larger to fit that hole. Original width was 65mm before I did that.
I used Overture white PETG with X1C strength preset, 0.2 layer height.
P.S. You can buy these too: https://www.amazon.com/dp/B0DQ5M3PGM
---
After designing and installing, I found a similar model: https://www.printables.com/model/676971-barn-door-floor-guide I liked this one since it hides the screw. If I were to revise this I might try something similar!