Cupholder Adapter (Yeti Rambler & Nalgene) for Universal Car Cup Holder Expander
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cupholder adaptor designed for the Yeti Rambler coffee mug and Nalgene bottle for universal cut holder base.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 1274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Like the original model, this remix holds either a 14oz Yeti Rambler or 32oz Nalgene bottle. This is modified to attach to universal cup holder for cars that screws into place like this one. Printed out of PETG for better heat resistance in the car, 0.2mm layers. The adapter is made so it shouldn't need supports. Once you have both parts, either glue or plastic weld the base adapter onto the bottom of the cup holder part. Then reinstall with the screw. I plastic welded them with some PETG filament and an old soldering iron tip.
The cup holder part was modified directly in Prusa slicer with basic geometry. Note that I increased the size of the holder by 1% as it was a bit snug before that for me. The adapter part was drawn up in FreeCad.