Prusa Core One 90deg upward exhaust adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redirect Prusa Core One's exhaust 90deg upward, connecting to 100mm inner-diameter hose.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter redirect Prusa Core One's exhaust 90deg upward, connecting to 100mm inner-diameter hose.
The hose connection point is leveled with top panel of Core One, for ease of connecting/disconnecting from the front.
Install
It contains 2 parts: Core One adapter (lower part), and 100mm hose adapter (upper part)
Use four 6mm M3 screws to connect 2 parts together.
Use four 8mm M3 screws to mount the adapter to Prusa Core One.
Drill/tap to prepare the screw holes if needed.
Different size of hose
The hose connection is sized at 99.5mm outer-diameter, to connect to 100mm inner-diameter hose. I've STEP files attached so you can design your own adapter easily.