1 / 3
Sonoff Basic enclosure with I2C Grove System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disclaimer Working with mains power is dangerous. Do it only if you know what you are doing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer
Working with mains power is dangerous. Do it only if you know what you are doing.
Since the Sonoff POW does not allow sensors to be connected because it has an over-all mains voltage, I have redesigned the Cadmium housing so that a normal Sonoff basic fits inside. Now I can operate up to four i2c sensors with the Tasmota firmware.
Oriented on Cadmium:
Except the printed parts, the following parts are required:
- Mains socket, Flange 50mm x 50mm, Distance (center-center) of the holes 38mm (Internet search: Schuko Einbaubuchse)
- Sonoff Basic Module
- GRV I2C HUB Arduino - Grove I2C-Hub
- 4pc Bolt DIN 963 M4x40
- 4pc Nut DIN 934 M4
- 4pc m3 threaded inserts
- 4pc m3 Bolt 5mm
- Wires, Ferrules, Power Cord
- Cable Gland M16x1.5