Elecraft KX3 insert for Nanuk 909 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This provides a two part insert for the Nanuk 909 case to store an Elecraft KX3.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Printed in PETG, it's split into two parts to fit normal build plates. Recess on the front right is for the lovely BaMaKey TP-ii. Recess on the back fits a 6Ah LiFePo from Eremit. PowerPole to DC adapter for the Elecraft KX3 can be screwed into place. Right side has holes for BNC pigtail and ground connector. My KX3 had the heatsink attached, might be too loose without one. Initial plans to use TPU as dampening inlay were not pursued as it's a tight enough fit to not being bumped around. OpenSCAD file is attached, needs dependencies (PowerPole and the svgs for the Nanuk bezel), so paths likely need to be adjusted.