FORMD T1 V1.1 Windowed Side Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to expose the internals of my PC but couldn't find anything that people had done on the original V1.1 case.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Requires a laser cutter to cut the clear panel out (2mm thick) and needs M3x5 low profile screws to look good. The screws screw directly into the printed parts, just don't over tighten and damage the window or strip the thread.
The picture panel is dimensionally the same I've just customised it for myself, the one uploaded just has the fan cut-out and my logo removed.
If you don't have a 3D printer, you can buy this part from my website:
https://ampdesignworks.co.uk/products/formd-t1-v1-1-window-side-panel