Segway Navimow RTK Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "stronger" and "taller" version of an RTK mount. The original was a good base, but he antenna was still…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a "stronger" and "taller" version of an RTK mount. The original was a good base, but he antenna was still below the roof line. This brings it up higher and is extremely strong. The weakest point is probably the two screws that hold the antenna onto the mount itself.
The RTK antenna will mount directly in, and use the provided screw to hold it down. There's two holes on the chamfer for zip ties to hold the cable along. THere's a hole at the bottom of the antenna "tube" to allow any moisture that gets in to it escape.
I printed it in Bambu .2 Strength setting, probably overkill but I'll never have to do it again…
Category: Outdoor & Garden