Sovol Zero Insulation Blueprint (Beta)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a blueprint for cutting insulation to shape for the Sovol Zero. Beta as the insulation for the e-bay is missing.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 470
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Just print out the templates onto A4 paper, stick them temporarily to the insulation, and cut out with a pair of (sharp) scissors.
You'll probably need about three 300x300mm sheets for this one. If I also get to make a template for the back, you'll need four of them. I've been using seven super-cheap insulation sheets, which were designed for the ANET A2.
I've used 10 mm thick insulation, which aligns perfectly with the grooves in the 2020 extrusions. You can slightly oversize the insulations, they will have a good fit on there own. You can always glue them in if you want to.
The LED strip needs to be relocated.
BE CAREFUL WITH THE CABLES WHEN INSTALLING!
Before this, I got 45°C at max, with this insulation, I got up to 57°C.
Set the heatbed to 120°C, move the Z-Axis to ~5mm, and turn on the aux-fan at 40%
Additionally, you can also move the Hotend to X150 Y75 and set the extruder to 200+ °C
